Home \ Faculty Details \ Muhammad Asad, Ph.D., CEng
Faculty Img

  • Phone:

    +966-13-849-9378

  • Email:

    masad@pmu.edu.sa

  • Office No:

    S-029

  • Muhammad Asad, Ph.D., CEng

  • Job Title :

    Associate Professor

  • College :

    College of Engineering


  • Department :

    Mechanical Engineering


Dr Muhammad Asad is Assistant Professor in Mechanical Engineering Department, College of Engineering at Prince Mohammad bin Fahd University. He received his MS & PhD degrees in Mechanical Engineering from INSA de Lyon, France in 2007 and 2010, respectively. He has rich and diversified experience of Industrial Production, R & D and Academia which spans over 15 Years. His research mainly encompasses Machining Modeling & Simulation area. He also keeps research interests in FEM, Materials Behavior Modeling, Manufacturing Processes Modeling, Tribology and Micro Machining.

 

Journal Publications

 

  • T Mabrouki, C Courbon, Y Zhang, J Rech, D Nélias, M Asad et al. Some insights on the modelling of chip formation and its morphology during metal cutting operations. Comptes Rendus Mecanique 344(4-5), 335-354 (2016).
  • H Ijaz, M Zain-ul-abdein, W Saleem, M Asad, T Mabrouki. A numerical approach on parametric sensitivity analysis for an aeronautic aluminium alloy turning process. Mechanika, 22(2), 149-155 (2016).
  • W Saleem, M Asad et al.  Numerical investigations of optimum turning parameters – AA 2024-T351 aluminum alloy. Machining Science & Technology (Accepted-In Press-2016).
  • M A Khan, W saleem, M Asad et al. A parametric sensitivity study on preforming simulations of woven composites using a hypoelastic computational model. Journal of Reinforced Plastics and Composites , 35(3), 243-257 (2016).
  • A Memon, S R Samo, M Asad et al. Modeling of Aerodynamic Forces on the Wind Turbine Blades. Journal of Clean Energy Technologies, 3(6), 406- 410 (2015).
  • H Ijaz, M Asad et al. Simulation of Delamination Crack Growth in Composite Laminates: Application of Local and Non-Local Interface Damage Models. Mehran University Research Journal of Engineering & Technology, 3(34), 255-264 (2015).
  • M Asad, T Mabrouki et al. On the turning modeling and simulation: 2D and 3D FEM approaches. Mechanics & Industry, 5(15), 427-434 (2014)
  • H Ijaz, M Asad et al. Prediction of delamination crack growth in carbon/fiber epoxy composite laminates using non-local interface damage model. Mechanics & Industry, 4(15), 293-300 (2014).
  • M Asad, H Ijaz et al. Turning modeling and simulation of an aerospace grade aluminum alloy using 2D and 3D FE method. Proc. IMechE, Part B: Journal of Engineering Manufacture, 228(3), 367-375 (2014).
  • W saleem, M A Khan, H ijaz, M Asad. Weight to Strength Analysis of Topological Optimized UAV Ribs. Arabian Journal of Science & Engineering, 39(6), 5035-5043 (2014).
  • H Ijaz, M Asad et al. Strain Energy Based Homogenization Method to Find The Equivalent Orthotropic Properties of Sandwich Structures. Sindh University Research Journal (Science Series), 46 (1), 93-98 (2014).
  • M Asad, T Mabrouki. On the modeling of an aluminum alloy milling: 3D FEM approach. Mechanika, 19(5), 588-592 (2013).
  • M Asad, T Mabrouki, et al. Three-dimensional finite element modeling of rough to finish down-cut milling of an aluminum alloy. Proc. IMechE, Part B: Journal of Engineering Manufacture, 227(1), 75-83 (2013).
  • T Mabrouki, J F Rigal, M Asad. A multiscale cutting model based on the theory of gradient plasticity. Advanced Materials Research, 698, 99-106 (2013).
  • A A Memon, M U Abbasi, A F Abbasi, M Asad. Modeling and simulation of flow around Wind turbine blade by using actuator surface model. Sindh University Research Journal (Science Series), 44 (4), 699-702 (2012).
  • M Asad, T. Mabrouki, et al. Towards a physical comprehension of material strengthening factors during macro to micro-scale milling. Mechanika, 17(1), 97-104 (2011).
  • M Asad, T Mabrouki et al. Finite-element-based hybrid dynamic cutting model for aluminium alloy milling. Proc. IMechE, Part B: Journal of Engineering Manufacture, 224(1), 1-13 (2010).
  • M Asad, T Mabrouki et al. On the tool vibration effects during down-cut peripheral milling process. International Journal on Interactive Design & Manufacturing, 4(4), 215-225 (2010).
  • T Mabrouki, F Girardin, M Asad et al. Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351). International Journal of Machine Tools & Manufacture, 48(11), 1187–1197 (2008).
  • M Asad, F Girardin et al. Dry cutting study of an aluminium alloy (a2024-t351): a numerical and experimental approach. International Journal of Material Forming, 1(1), 499-502 (2008).

Conferences Publications

  • Muhammad Asad, Faramarz Djavanroodi, Hassan Ijaz, Muhammad Azhar Ali Khan, Muhammad Usman Rashid, Tarek Mabrouki “Numerical Modeling the Effects of Chamfer and Hone Cutting Edge Geometries on Burr Formation” 2020 PMU International Conference on Industrial Revolution 4.0 in Computing, Mobility and Manufacturing (CMM 2020), 08-10 December 2020, Khobar, Saudi Arabia.

  • Muhammad Asad, Hassan Ijaz, Muhammad Azhar Ali Khan, Asim Asghar yaseen, Taha Waqar, Abdul Aziz Afzal6, “A numerical insight on machining burr formation: A comprehension-to- optimization approach” 10th International Conference on key Engineering Materials ( ICKEM 2020), 26-29 March 2020, Madrid, Spain.
  • Muhammad Asad “Burr control using modified tool geometry: A 3D FEM approach”, International Conference on Advances in Manufacturing and Materials Engineering 2019 ( ICAMME 2019), 30-31 October 2019, Putrajaya, Malaysia.
  • M Asad et al. (2015) A numerical approach on the design of a sustainable turning insert. National Multidisciplinary Engineering Conference (NMEC-15), Lahore, Pakistan, November 2015.
  • S M A Shah, L A Lehri, M I Tareen, M Asad. (2013) A simplified method to model phase transformation during grinding process. 3rd International Advances in Applied Physics and Materials Science Congress, Antalya, Turkey, April 2013.
  • T Mabrouki, Y Zhang, M Asad et al. (2012) On how to capture scale effects during the modelling of material removal by cutting tool. 7th Assises MUGV/Intercut Conference, Saint-Étienne, France, October 2012.
  • M Asad, T Mabrouki et al. (2010) A FE-Approach on the influence of material strengthening factors on size effect during macro-to-micro scale milling. 4th Int. Conference on Tribology in Manufacturing Processes, Nice, France, June 2010.
  • M Asad, T Mabrouki et al. (2009) On the tool vibration effects during down-cut peripheral milling process. 11th AIP Primeca conference, Plagne, France, April 2009.
  • M Asad, T Mabrouki et al. (2009) A numerical study of thermo-mechanical effects for dynamic milling process. 9th National PPF conference, Saint-Étienne, France, March 2009.
  • M Asad, C Hignette et al. (2008) Numerical and experimental approach for an aluminium alloy micro-milling. 2nd international conference on innovative cutting processes and smart machining, Cluny, France, October 2008.
  • M Asad, F Girardin et al. (2008) Dry cutting study of an aluminium alloy (a2024-t351): a numerical and experimental approach.11th International ESAFORM Conference on material forming, Lyon, France, April 2008.
  • M Asad, T Mabrouki et al. (2008) Un modele elements finis pour simuler le fraisage d’un alliage d’aluminium. 5th Assises MUGV Conference, Nantes, France, June 2008 (in French).
  • M Asad, T Mabrouki et al. (2008) Prediction of chip morphology during milling of an aeronautic aluminium alloy (A2024-T351). 13th Manufacturing 21conference, Saint-Étienne ,France, April 2008.
  • M Asad, F Girardin et al. (2007) Contribution a l’étude dynamique de la formation du copeau, cas de la simulation du fraisage des alliages d’aluminium. 10th AIP Primeca conference, Plagne, France, April 2007 (in French).

 

Google Scholar: https://scholar.google.com/citations?user=70rIGdIAAAAJ&hl=en

Scopus ID:  https://www.scopus.com/authid/detail.uri?authorId=57195959292

ORCID ID:https://orcid.org/0000-0002-0451-4864

 

 

 

  • FEM
  • Materials Behavior Modeling
  • Manufacturing Processes Modeling
  • Tribology
  • Micro Machining

 

 

  • Member International Association of Engineer(IAENG), Hong Kong.
  • Professional Engineer, Pakistan Engineering Council, Pakistan.
  • Life member, Pakistan Engineering Congress, Pakistan
  • Chartered Engineer, CEng MIMechE, UK