Andi Asiz, Ph.D., PEng

Publications
Refereed Journals

• Chowdhury, S., Ayadat, T., Asiz, A. (2020), Rubric-based scoring for engineering senior design course assessment and grading, World Transactions on Engineering and Technology Education, Vol. 18, No. 4, pp 1-10.
• Ayadat, T., Asiz, A. (2020), Analysis of Engineering Accreditation Process and Outcomes: Lessons Learned for Successful First Time Application, International Journal of Learning, Teaching and Educational Research, Vol. 19, No. 9, pp. 281-300.
• Chowdhury, S., Alhelal, F., Alahmadi, M., Alqahtani N., Alkhaldi, A., Asiz, A. (2020), An Overview on Major Design Constraints, Impact and Challenges for a Conventional Wastewater Treatment Design, Journal of Environmental Treatment Techniques, Vol. 9, Issue 1, pp 7-16.
• Ayadat, T, Ahmed, D., Chowdhury, S., Asiz, A. (2020), Measurable Performance Indicators of Student Learning Outcomes: A Case Study, Global Journal of Engineering Education, Vol. 22, No. 1, pp 40-50
• Ahmed, D., Asiz, A. (2017), Structural Performance of Hybrid Multi-Storey Buildings with Massive Timber-Based Floor Elements Loaded Under Extreme Loads, International Journal of Computational Methods and Experimental Measurements, Vol. 5, No. 6, pp. 905-916.
• Alsari, A., Alhalal H., Ayadat, T., Asiz, A., Ouda, O, (2017), Management of Al-Khaldiyah Road (Al Khobar) in Order to Optimize Safety and Improve Sight View, American Journal of Traffic and Transportation Engineering; Vol. 2, Issue 1, pp. 6-9.
• Ayadat, T., Ouda, O., Salman, A., Ahmed, D., and Asiz, A. (2017), Research Development, Challenges, and Opportunities at the Department of Civil Engineering at Prince Mohammad Bin Fahd University, Asian Pacific Journal of Contemporary Education and Communication Technology, Vol. 3, Issue 2, pp. 195–206.
• Ouda, O., Ayadat, T., Asiz, A., Alghazo, Y. (2016), Utilizing Learning Outcomes Assessment for Civil Engineering Program Evaluation and Improvement: A Case Study, Journal of Scientific and Engineering Research, 3(3): pp. 549-561.
• Erdle, A., Weckendorf, J., Asiz, A., Smith, I. (2014), Effectiveness of Distributed Mass Damper Systems for Lightweight Superstructures, ASCE Journal of Performance of Constructed Facilities – Special Issue: Performance of Timber and Hybrid Structures, Vol. 28, No 6, Paper A4014005.
• Asiz, A., Smith, I. (2014), Control of Building Sway and Force Flows Using Ultra-lightweight Slabs, ASCE Journal of Performance of Constructed Facilities – Special Issue: Performance of Timber and Hybrid Structures, Vol. 28, No. 6, Paper A4012015.
• Kosny, J., Asiz, A., Smith, I., Shresta, S., Fallahi, A. (2014), High R-Value Wood Framed and Composites Wood Wall Technologies Using Advanced Insulation Techniques, Energy and Buildings, 72: 441-456.
• Asiz, A., Smith, I. (2011), Connection System of Massive Timber Elements Used in Horizontal Slabs of Hybrid Tall Buildings, ASCE Journal of Structural Engineering, 137 (11), 1390-1393.
• Murty, B., Asiz, A., Smith I. (2011), Tests and Models for Engineered Wood Product Connections Using Small Steel Tube Fasteners, Engineering Structures, 33: 63-68.
• Asiz, A., Smith, I. (2009), Demands Placed on Steel Frameworks of Tall Buildings Having Reinforced Concrete or Massive Wood Horizontal Slabs, Structural Engineering International, Vol. 19, No. 4, pp 395-403 (9).
• Murty, B., Asiz, A., Smith, I. (2009). Wood and Engineered Wood Product Connections Using Small Steel Tube Fasteners: An Experimental Study, The Journal of Institute of Wood Science, Vol. 18, No 2, Issue 104, pp 59-67. 
• Murty, B.,  Smith, I.,  Asiz, A. (2007). Wood and Engineered Wood Product Connections Using Small Steel Tube Fasteners: Applicability of European Yield Model, ASCE Journal of Materials in Civil Engineering, Vol. 19, No. 11, pp 995-971.
• Smith, I., Snow, M., Asiz, A., Vasic, S. (2007). Failure Mechanisms in Wood-based Materials: Discrete, Continuum, and Hybrid Finite Element Representations. A Review, Holzforschung – International Journal of the Biology, Chemistry, Physics and Technology of Wood, Vol. 61, Issue 4, pp 352-359.
• Snow, M., Asiz, A., Chen, Z., Chui, Y.H. (2006). North American Practices for Connections in Wood Construction, Progress in Structural Engineering and Materials, 8:39-48.
• Asiz, A., Munaf, D.R. (2005). Factory-Built Housing in Indonesia: Current Practice and Future Challenges, Journal of Civil Engineering – Special Edition Management and Construction Engineering, Vol. 12, No 3, pp 137-143.  
• Asiz, A., Xi, Y., Zhang, W. (2003). Analysis of Aging of Piezoelectric Resonators, IEEE Transaction on Ultrasonic, Ferroelectric, and Frequency Control, Vol. 50, Issue 12, pp 1647- 1655.
• Roh, Y.S., Asiz, A., Zhang, W., Xi, Y. (2003). Experimental Study and Theoretical Prediction of Aging Induced Frequency Shift of Crystal Resonators and Oscillators, Microelectronic Reliability, Vol. 43, Issue 12, pp 1993-2000.

Book Chapter contribution

• Asiz, A. (2014), Chapter on Composite and Hybrid Systems, Structural Engineering Document -Use of Timber in Tall Multi-Storey Buildings, International Association for Bridge and Structural Engineering, Editors: Ian Smith and Andrea Frangi.

Refereed Conference Proceedings

• Ahmed, D., Ayadat, T., Asiz, A. (2020), Design and Performance of High-Rise Structure Using Ultra-lightweight Cross Laminated Timber Floor System, Proc. of International Structural Engineering and Construction- Emerging Technologies and Sustainability Principles, 7(2), ISSN: 2644-108X.
• Salman, A., Ayadat, T., Chowdhury, S., Ouda, O., Ahmed, D., Asiz, A. (2018), Analysis of Student Learning Outcomes Measure: A Case Study of Civil Engineering Department at Prince Mohammad Bin Fahd University, 2^nd International Conference on Emerging Research for Sustainable Economic Development, March 6-7, Kingdom of Bahrain.
• Hajjaj, R., Alhimeidi, A., Sabbagh, M., Alatallah, A., Ahmed, D., Asiz, A., Ayadat, T., Salman, A., Ouda, O., (2017), “Structural Design and Analysis of High-Rise Building Using Ultra-Lightweight Floor System”, Resilient Structures and Sustainable Construction, July 24-29, Valencia, Spain, 6p.
• Ajmal, M., Ahmed, D., Asiz, A. (2016), Structural Performance of Hybrid Tall Buildings Designed Using Ultra-Lightweight Floor Slabs, SEMC2016: The Sixth International Conference on Structural Engineering, Mechanics, and Computation, Sept 5-7, Cape Town, South Africa, 5p.
• Ussher, E., Erdle, A., Asiz, A., Smith, I. (2014), Enhancing Dynamic Performance of Lightweight Superstructures Using Supplementary Damping, 13th World Conference on Timber Engineering, Quebec City, Canada, 8p.
• Kiwelu, H., Smith, I., Asiz, A. (2014), Finite Element Models of Effects of Moisture on Bolt Connection Properties of Glulam , 13th World Conference on Timber Engineering, Quebec City, Canada, 10p.
• Asiz, A., Ouda, O., Ayadat, T., Nayfeh, J (2014), Performance measures of student learning outcomes for civil engineering at PMU, 2nd Dubai International Conference in Higher Education, Jan 19-20, Dubai, United Arab Emirates, 9p. (on CD ROM).
• Asiz, A. Ahmed, D. (2013), Structural Modeling and Design of Tall Buildings Composed of Ultra-lightweight floor systems, 2013 World Congress in Structural Engineering and Mechanics, Sept 8-12, South Korea, 8p. (on CD ROM)
• Meleki, H., Asiz, A., Smith, I., Asiz, A., (2012), Moisture induced deformation in glulam members - experiments and 3-d finite element model, 12th World Conference on Timber Engineering, July 15-19, Auckland, New Zealand, 9p. (on CD ROM).
• Erdle, A., Smith, I., Weckendorf, J., Asiz, A., (2012), Control of the dynamic performance of hybrid steel frame and cross laminated timber slab buildings, 12th World Conference on Timber Engineering, July 15-19, Auckland, New Zealand, 6p. (on CD ROM).
• Zhou, L., Chen, Z., Chui, Y.H., Ni, C., Asiz, A., (2012), Seismic performance of mid-rise light wood frame structure connected with reinforced masonry Core, 12th World Conference on Timber Engineering, July 15-19, Auckland, New Zealand, 9p. (on CD ROM).
• Asiz, A., Chui, Y.H., Ni, C., Mohammad, M., Doudak, G. (2011), Seismic performance of multi-storey light wood frame buildings with hybrid bracing systems, Proceeding of the Annual Meeting of the Canadian Society for Civil Engineering, Ottawa, ON, 10p, Paper GC128.
• Al Mamun, A., Doudak, G., Ni, C., Mohammad, M., Chui, Y.H., Asiz, A. (2011),  Alternative bracing systems in light-wood frame buildings, Proceeding of the Annual Meeting of the Canadian Society for Civil Engineering, Ottawa, ON, 10p, Paper GC101.
• Asiz, A., Chui, Y.H., Doudak, G., Ni, C., Mohammad, M. (2011), Contribution of plasterboard finishes to structural performance of multi-storey light wood frame buildings, Procedia Engineering, Vol. 14, Issue 2011, p. 1572-1581.
• Meleki, H., Asiz, A., Smith, I., Gagnon, S., Mohammad, M. (2011), Differential movements in hybrid multi-storey timber building, Procedia Engineering, Vol. 14, Issue 2011, p. 1613-1620.
• Asiz, A., Smith, I. (2010), Tall hybrid reinforced concrete framed buildings with massive timber floor plates, Structures and Architecture – Cruz (Ed), Taylor & Francis Group, London, pp 1340-1347.
• Asiz, A., Chui, Y.H., Smith, I., Bartlett (2010), Full-scale destructive wind tests on wood light-frame structures, 11th World Conference on Timber Engineering, June 20-24, Riva del Garda, Trentino, Italy, 6p. (on CD ROM).
• Asiz, Chui, Y.H., Zhou, L. (2010), Characteristics of lumber-to-lumber framing connections in light-frame wood structures, 11th World Conference on Timber Engineering, June 20-24, Riva del Garda, Trentino, Italy, 9p. (on CD ROM).
• Asiz, A., Chui, Y.H., Smith, I., Zhou, L. (2010), Three-dimensional numerical model of progressive failure in wood light-frame buildings, 11th World Conference on Timber Engineering, June 20-24, Riva del Garda, Trentino, Italy, 9p. (on CD ROM).
• Noory, M., Smith, I., Asiz, A. (2010), Tests and numerical models for shear walls with various layers, 11th World Conference on Timber Engineering, June 20-24, Riva del Garda, Trentino, Italy, 9p. (on CD ROM).
• Gupta, G., Asiz, A., Smith, I., Chui, Y.H. (2010), In-plane and Out-of-plane Modal Responses of Timber Light-frame Wall Segments, 11th World Conference on Timber Engineering, June 20-24, Riva del Garda, Trentino, Italy, 9p. (on CD ROM).
• Leung, T., Asiz, A., Chui, Y.H., Mohammad, M., Hu, L. (2010), Predicting lateral deflection and fundamental natural period of multi-storey wood frame buildings, 11th World Conference on Timber Engineering, June 20-24, Riva del Garda, Trentino, Italy, 9p. (on CD ROM).
• Wang, Q., Chui, Y.H., Ni, C., Smith, I., Asiz, A. (2010), An empirical model to predict load-slip response of laterally loaded nailed joint, 11th World Conference on Timber Engineering, June 20-24, Riva del Garda, Trentino, Italy,9p. (on CD ROM).
• Smith, I., Asiz, A. (2009), Transitioning from design of timber components to design of systems, Joint IABSE – fib Conference: Codes in Structural Engineering Developments and Needs for International Practice, Dubrovnik, Croatia, May 3-5, 9p. (on CD ROM).
• Asiz, A., Smith, I. (2009), Structural Connections in Massive Timber Plate Elements in Hybrid Structures, 33rd International Association for Bridge and Structural Engineering (IABSE) Symposium: Sustainable Infrastructure, Environmentally Friendly, Safe and Resource Efficient, Bangkok, Thailand, Sept 9-11, 9p. (on CD ROM)
• Noory, M., Asiz, A., Smith, I., Doudak, G., Mohammad, M. (2009), Load Path in Low-Rise Wood Light Frame Buildings, Annual Conference of the Canadian Society for Civil Engineering, St. John’s, NL, Paper GC-126, 10p. (on CD ROM)
• Asiz, A., Chui, Y.H., Smith, I. (2008). Failure analysis of light-frame wood structures, International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), St. Andrews, New Brunswick, Canada, August 24-28. Paper 41-15-5.
• Snow, M., Smith, I., Asiz, A.. (2008). Applicability of existing design approaches to mechanical joints in structural composite lumber, International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), St. Andrews, New Brunswick, Canada, August 24-28, Paper 41-6-1.
• Asiz, A., Smith, I. (2008) Designed of inclined glulam members with an end notch at the tension face, International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), St. Andrews, New Brunswick, Canada, August 24-28, Paper 41-7-1.
• Smith, I., Asiz, A. (2008), Large X-lam (Cross laminated timber) shallow-profile and roof plates for composite construction, International Association for Bridge and Structural Engineering (IABSE) Congress on Creating and Renewing Urban Structures- Tall Buildings, Bridges and Infrastructure, Chicago, September 14-15.
• Chui, Y.H., Asiz, A., Smith, I., Bartlett, F.M. (2008). Post-yielding and load redistribution behaviour of light-frame wood structures under wind loads, Proceeding of the Annual Conference of Canadian Society for Civil Engineers, June 10-13, Quebec City, Canada.
• Noory, M., Smith, I., Asiz, A. (2008). Static load test of low-rise wood building, Proceeding of the 10th World Conference on Timber Engineering, June 2-5, Miyazaki, Japan.  (on CD ROM)
• Noory, M., Smith, I., Asiz, A. (2008). Shear wall test, Proceeding of the 10th World Conference on Timber Engineering, June 2-5, Miyazaki, Japan. (on CD ROM)
• Gupta, G., Asiz, A., Smith, I. (2008). Structural performance of prefabricated wood building during handling and transportation, Proceeding of the 10th World Conference on Timber Engineering, June 2-5, Miyazaki, Japan. (on CD ROM)
• Smith, I., Asiz, A., Snow, M. (2008). Failure characteristic of engineered wood product connections, Proceeding of the 10th World Conference on Timber Engineering, June 2-5, Miyazaki, Japan. (on CD ROM)
• Asiz, A., Smith, I. (2008). Inclined glue laminated timber beams with an end notch at the tension side, Proceeding of the 10th World Conference on Timber Engineering, June 2-5, Miyazaki, Japan. (on CD ROM)
• Asiz, A., Smith, I., Menendez, V. (2008). Air leakage and moisture deposition of prefabricated light-frame wood building, Proceeding of the 10th World Conference on Timber Engineering, June 2-5, Miyazaki, Japan. (on CD ROM)
• Quenneville, P., Smith, I., Asiz, A., Snow, M., Chui, Y.H. (2006) Generalized Canadian Approach for Design of Connections with Dowel Fasteners, International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), Florence, Italy, Aug 28-31.
• Smith, I., Asiz, A., Snow, M., Chui, Y.H., Proposed Canadian / ISO Approach for Deriving Design Values from Test Data. (2006), International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), Florence, Italy, Aug 28-31.
• Smith, I., Asiz, A., Dick, K., Doudak, G., Mohammad, M. (2006). Field-Monitoring, Models and Design of Timber Buildings, Proceeding of the World Conference in Timber Engineering, August 6-10, Portland, Oregon, USA.
• Asiz, A., Smith, I., Hu, C., Afzal, M. (2006). Lifting and Transportation Forces Generated in Wood Building-Modules, Proceeding of the World Conference in Timber Engineering, August 6-10, Portland, Oregon, USA.
• Murty, B., Asiz, A., Smith, I. (2006). Wood Connections with Small Steel Tube Fasteners, Proceeding of the World Conference in Timber Engineering, August 6-10, Portland, Oregon, USA.
• Snow, M., Asiz, A., Smith, I. (2006). Modeling Fracture in Bolted Engineered Wood Joints, Proceeding of the World Conference in Timber Engineering, August 6-10, Portland, Oregon, USA.
• Smith, I., Asiz, A., Snow, M. (2006) Design Methods for Connections in Engineered Wood Structures, Final Report No.UNB2, Value-to-Wood Program, Natural Resources Canada, Ottawa, Ontario, 80p.
• Asiz, A., Iranpour, M., Smith, I. (2005). Analysis of structural stresses during handling and transportation of factory-built housing construction, 33rd Annual Conference of the Canadian Society for Civil Engineers, June 2-4, Toronto, Canada (on CD-ROM).
• Snow, M., Asiz, A., Smith, I. (2005). Fracture behaviour of multiple-bolt engineered wood product connections, 11th  International Conference on Fracture, March 20-25, Turin, Italy (on CD-ROM).
• Snow, M., Asiz, A., Smith, I. (2004). Failure Behaviour of Single Dowel Connections in Engineered Wood Products, 5th Structural Specialty Conference of the Canadian Society for Civil Engineering, Saskatoon, June 2-5,(on CR-ROM).
• Asiz, A. and Smith, I. 2005. New generation of timber design practices and code provisions linking system and connection design. International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), Karlsruhe, Germany, August 29 – 31. Paper 38-102-1.
• Murty, B., Smith, I., Asiz, A. (2005). Design of timber connections with slotted-in steel plates and small diameter steel tube fasteners, International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), Karlsruhe, Germany, August 29 – 31, Paper 38-7-7.
• Snow, M., Smith, I., Asiz, A. (2004). Dowel joints in engineered wood products: Assessment of simple fracture mechanics models, International Council for Research and Innovation in Building and Construction Working Commission W-18 (Timber Structures), Edinburgh, Scotland, UK, August 31 – Sept 3,Paper 37-7-14.
• Asiz, A., Xi, Y. (2002). Aging Induced Frequency Shift of Piezoelectric Resonators, Fifth World Congress on Computational Mechanics, July 7-12, Vienna, Austria.
• Zhang, W.P., Roh, Y., Asiz, A., and Xi, Y. (2000). Experimental Study and Prediction of Frequency Shift of Piezoelectric Ceramic Packages, Proc. International Society for Optical Engineering (SPIE) Nondestructive Evaluation of Aging Materials and Composites IV, Vol. 3993, pp 158-169, George Y. Baaklini; Carol A. Lebowitz; Eric S. Boltz; Eds.
• Nakhi, A., Xie, Z.H., Asiz, A., Ababneh, A., and Xi. Y. (2000). Experimental Study on Chloride Penetration under Coupled Hygromechanical Loadings, Special Publication of ASCE Condition Monitoring of Materials and Structures, F. Ansari, Editor, pp 84-94.
• Nakhi, A., Xie, Z., Asiz, A., Ababneh, A., and Xi, Y. (2000). Chloride Penetration under Coupled Hygromechanical Loadings, Proc. 13th Engineering Mechanics Conference: Engineering Mechanics 2000, May 21-24, Austin, TX, USA, (on CD-ROM).
• Ikhsan, M., Suwito, A., Asiz, A., Siahaan, F. (1995). Thermal gradient effect of long-span concrete bridge deck – Case study: Batam-Tonton cable stayed bridge, Proceeding of the Annual Seminar on Finite Element Method, Department of Mechanical Engineering, Bandung Institute of Technology, Bandung.

Technical reports (submitted to governments) and theses:

• Asiz, A., Kosny, J., Desjarlais, A. (2010), Framing and Composite Wood Technologies for High R-Value Wall Assemblies, Final Report, Building Envelope Research Group, The U.S. Oak Ridge National Laboratory, Oak Ridge, TN, 24p.
• Asiz, A., Smith, I., Gagnon, S., Mohammad, M., Munoz, W. (2009), Study on Differential Shrinkage in Hybrid Multi-Storey Timber-Concrete Building, Report for FPInnovation – Forintek Division, Quebec City, 11pp.
• Asiz, A., Chui, Y.H., Smith, I., Zhou, L. (2009). Development of Advanced System Design Procedures for the Canadian Wood Design Standard, Final Report No. UNB01, Value-to-Wood Program, Natural Resources Canada, Ottawa, Ontario, 107pp.
• Smith, I., Asiz, A., Snow, M. (2007) Performance of Mechanical Fasteners Used with Engineered Wood Products, Final Report No UNB75, Value-to-Wood Program, Natural Resources Canada, Ottawa, Ontario, 116p.
• Smith, I., Asiz, A., Gupta, G. (2007) High Performance Modular Wood Construction Systems, Final Report No UNB5, Value-to-Wood Program, Natural Resources Canada, Ottawa, Ontario, 151pp.
• Smith, I., Asiz, A Snow, M. (2006) Design Methods for Connections in Engineered Wood Structures, Final Report  No UNB2, Value-to-Wood Program, Natural Resources Canada, Ottawa, Ontario, 80pp.
• Asiz, A. (2003), Experimental Study and Numerical Analysis of Aging of Piezoelectric Resonators, Doctoral Dissertation, Department of Civil, Environmental, and Architectural Engineering, University of Colorado at Boulder, Colorado, USA.
• Xi, Y., Chang, S., Asiz, A., Li, Y. (2004). Long-term Durability of Fiber-Reinforced Polymers (FRPS) and In-Situ Monitoring of FRP’s Bridge Decks at O’Fallon Park Bridge, Final Report, Report No. CDOT-DTD-R-2004-03, 60p, Colorado Department of Transportation, Denver, Colorado.
• Xi, Y., Abu-Hejleh, N., Asiz, A., Suwito, A. (2004). Performance Evaluation of Various Corrosion Protection Systems of Bridges in Colorado, Final Report, Report No. CDOT-DTD-R-2004-01, 128pp, Colorado Department of Transportation, Denver, Colorado.
• Sture, S., Xi, Y., Asiz, A. (2001). Earthquake Resistant Analysis of Federal Aviation Administration Traffic Control Buildings”, Final Report, Federal Aviation Administration of the USA, 53 pp.
• Asiz, A. (1998). Comparison of Finite Element and Finite Volume Methods to Solve Steady State Metal Flow, Master Thesis Report, Department of Civil Engineering, Colorado State University, Ft. Collins, Colorado, USA.  
• Suhartono, A., Asiz, A. (1994). Preliminary Design of Pre-stressed Concrete Bridges Constructed using Incremental Launching Method (in Indonesian), Bachelor Thesis, Department of Civil Engineering, Bandung Institute of Technology, Bandung, West Java, Indonesia.

Additional technical presentations (to industry and general public/governments)

• Asiz, A., Chui, Y.H. (2011), Development of Hybrid Bracing Solutions for Light-wood Frame Buildings, 1st NEWBuildS (Network for Engineered Wood-based Building Systems), Annual Workshop, Jan 17th, Vancouver, BC, Canada.
• Smith, I., Asiz, A., Noory, M., Gupta, G. (2010), Load paths in wood light-frame buildings, to be presented at the CSAO86-01 code committee meeting in Engineering Design in Wood, Jan 21-23, Ottawa, Ontario.
• Asiz, A., Smith, I. (2008), Timber in tall buildings, presented at the 20th Anniversary of Wood Science and Technology Centre, Oct 16, Fredericton, NB.
• Snow, M., Smith, I., Asiz, A., (2008), 3-Dimensional Lattice Model for Predicting Failure in Structural Composite Lumber Products, 8th World Congress on Computational Mechanics and 5th European Congress on Computational Method in Applied Sciences and Engineering, June 30 – July 4, Venice, Italy.
• Asiz, A., (2008), Timber Construction - general lecture given to civil engineering students at State University of Yogyakarta (UNY), June12, Yogyakarta, Indonesia.
• Asiz, A., Smith, I. (2007), Capacity of Inclined Glulam Members with Shallow Bird-Mouth Notches: Update on Full-Scale Tests, Progress Report, CSA-O86.01 Code Committee Meeting in Engineering Design in Wood, Nov 01-02, Vancouver, B.C.
• Asiz, A., Smith, I. (2007), High Performance Modular Wood Construction System, Technical Advisory Meeting of the Value-to-Wood Program, Natural Resources Canada, June 13, Quebec City, Canada.
• Asiz, A., Smith, I. (2006), Design Methods for Connections in Engineered Wood Structures, Technical Advisory Meeting of the Value-to-Wood Program, Natural Resources Canada, June 14, Quebec City, Canada.
• Asiz, A. (2006). Prefab Wood Building Technologies and Research, Industrial Research Assistantship Program Seminar, Wood Science and Technology Centre, March 28, University of New Brunswick, Fredericton, Canada.
• Murty, B., Smith, I., Asiz, A. (2005). Load Carrying Capacity of Single Tube Connections in Laminated Strand Lumber, 3rd International Conference on Advanced Engineering Wood Composite, July 11-15, Maine, USA.
• Snow, M., Asiz, A., Smith, I. (2005). Comparison of Multiple-Bolt Arrangements in Structural Composite Lumber Connections, 3rd International Conference on Advanced Engineering Wood Composite, July 11-15, Maine, USA.
• Snow, M., Asiz, A., Smith, I. (2005). Fracture Models of Bolted Wood Connections, US National Congress on Computational Mechanics, July 24-28, Austin, Texas, USA.
• Asiz, A., Smith, I. (2005). Factory-Built Wood Housing: North American Practice, 59th International Convention of the Forest Product Society, June 19-22, Quebec City, Canada.
• Murty, B., Smith, I., Asiz, A. (2005). Tensile Strength Capacity of Double Shear Single Hollow Tube Connections in Laminated Strand Lumber, 59th International Convention of the Forest Product Society, June 19-22, Quebec City, Canada.
• Snow, M., Asiz, A., Smith, I. (2005). Engineered Wood Products Dowel Connections, 59th International Convention Forest Product Society, June 19-22, Quebec City, Canada.
• Asiz, A., Smith, I., Snow, M., Murty, B. (2004). Engineered Wood Product Connections, Workshop on Lateral Load Resisting Systems and Connections in Timber Structures: Identification and Coordination of Future Research Needs, November 17-18, Mississauga, Ontario.
• Murty, B., Asiz, A., and Smith, I. (2004). Innovative fastener for engineered wood product connections, 2nd Biennial Eastern CANUSA Forest Science Conference, Fredericton, NB October 15-16.
• Snow, M., Smith, I., and Asiz, A. (2004). Failure characteristics of bolted laminated strand lumber connections, 2nd Biennial Eastern CANUSA Forest Science Conference, Fredericton, NB October 15-